BLOG
Survival by quality, development by integrity

MX2623P Water-Soluble Cationic Acrylic Resin | Low VOC & High Penetration, Solving Anti-Grain-Raising and Sanding Challenges for Waterborne Wood Primers

Release time:2026-09-23


In waterborne wood coating, a sealing primer must be able to penetrate deep into wood pores while also delivering anti-grain-raising, filling, sanding and water-resistance performance. Especially on woods such as rubberwood, red oak, black walnut and Mongolian pine, ordinary waterborne systems are easily affected by issues such as moisture uptake, raised fibers and grain raising, resulting in poor sanding after application and insufficient film fullness. Addressing the combined requirements of waterborne wood sealing primers for penetrability, sealing, sandability and low VOC, MX2623P is designed with a high-molecular-weight water-soluble inorganic nano-modified cationic acrylic resin. While maintaining the application characteristics of waterborne systems, it strengthens penetration and sealing into wood pores, providing a more complete resin solution for waterborne wood primers.

I. Application Scenarios

MX2623P is mainly targeted at applications such as waterborne wood sealing primers and anti-grain-raising primers. For woods such as rubberwood, red oak, black walnut, Mongolian pine and Manchurian ash, the resin offers good pore-entry and high penetration, helping to improve grain-raising issues on the wood surface. Meanwhile, the system provides good filling and fullness, making it suitable for wood coating scenarios with high requirements on substrate sealing and subsequent sanding.

II. Core Technical Solution

1. Cationic water-soluble system with high penetration into wood pores

MX2623P is a high-molecular-weight water-soluble inorganic nano-modified cationic acrylic resin with good pore-entry and penetration ability. When used in wood sealing primers, it can enter wood pores more fully and seal the wood surface, thereby helping to reduce grain raising caused by moisture uptake in the wood.

2. Low VOC while meeting waterborne application needs

The product inherently features low VOC; when tested with a VOC handheld tester in actual use, the resin reading is approximately 300–500. For waterborne wood coating systems that increasingly emphasize low odor and low VOC, it can serve as one of the resin options for low-VOC waterborne sealing primers. In addition, MX2623P can be diluted with tap water, and after application the spray gun can also be cleaned directly with tap water, further reducing solvent usage during the cleaning stage of application.

3. Fast through-drying, no sand clogging when sanded overnight

One of the common application pain points of waterborne wood primers is that after the film dries, sanding tends to clog the sandpaper or leave an unclean grit. In actual application, MX2623P delivers good sanding performance — overnight sanding produces clean powder and does not clog the sandpaper, helping to improve subsequent sanding efficiency.

4. Balanced filling and fullness

In addition to sealing and penetration performance, MX2623P also provides good filling and fullness, which can reduce the impact of wood substrate defects on the final film appearance. For applications that need to balance wood sealing, primer filling and subsequent topcoat effects, it can serve as the base resin for waterborne sealing primer systems.

5. Pairing with a cationic curing agent for further improved overall performance

MX2623P can be used together with the cationic curing agent MG623B; the recommended addition ratio of resin to curing agent is 100:10–20. In two-component systems, it can further bring out the overall performance of the resin system, while delivering good water resistance and passing thermal cycling tests.

III. Conclusion & Selection Recommendation

For waterborne wood sealing primers, the resin must not only satisfy "waterborne", but also address practical application issues such as penetration, anti-grain-raising, drying, sanding and water resistance at the same time. Built on a water-soluble cationic acrylic resin and reinforced with inorganic nano modification, MX2623P combines high penetration, low VOC, fast through-drying and good sandability. If the application priorities are wood sealing, anti-grain-raising and subsequent sanding, especially on woods such as rubberwood, red oak, black walnut, Mongolian pine and Manchurian ash, MX2623P can be tested as the resin solution for waterborne wood sealing primers. For systems requiring further improvement in overall performance, it may be considered together with the MG623B cationic curing agent.

IV. Product Professional Credentials

MX2623P is supplied by KDD® KeDing and positioned as a functional water-soluble acrylic resin in the field of waterborne wood sealing primers. The product has a solids content of about 52%, a viscosity at 25℃ of about 1500–5500 cps and a pH of about 5–6; it is soluble in DMC and alcohol solvents, and can be diluted with tap water. From wood penetration and anti-grain-raising to drying, sanding and low-VOC control, MX2623P emphasizes overall performance in the actual application of waterborne wood primers, providing a more flexible resin selection solution for wood coating.