MR1762 Acrylic resin

Overview of Emergency Situation:
Colorless or pale yellow liquid with solvent odor. Flammable liquids and vapors. Its vapor can form explosive mixtures with air
Things. Harmful by inhalation; Causing mild skin irritation; Causing eye irritation.
GHS hazard category:
H226 Flammable liquid category 3
H315 Skin Corrosion/Irritation Category 2
H320 Causes Eye Irritation Category 1
H316 Causes mild skin irritation Category 3
H332 Inhalation Hazardous Category 4
H312 Acute Toxicity - Transdermal Category 4
H401 Toxic to aquatic organisms, category 2
H373 Long term or repeated exposure may damage organ category 2

Pictogram:
Warning word: Warning
Hazard statement: Flammable liquid and vapor, causing skin irritation, serious eye damage, suspected to cause genetic defects; Suspected of causing harm to fertility or the fetus
Injury, which may cause respiratory irritation or drowsiness or dizziness; Long term or repeated exposure can cause damage to organs, be harmful when swallowed, and may lead to skin irritation
Allergic reactions, harmful in skin contact, may cause long-term and sustained harmful effects on aquatic organisms.
Chemical Safety Data Sheet
Compiled according to GB/T 16483 and GB/T 17519 version numbers Revision No: V1.3 SDS-CN
 

Preventive measures:
P210 Keep away from heat sources, sparks, open flames, and hot surfaces.

P242 can only be used with non sparking tools.

P261 Avoid inhaling dust, smoke, gas, smoke, steam and spray.

P233 Keep the container tightly sealed.

P243 Take measures to prevent static electricity, place static discharge, and ground and connect containers and receiving equipment.

P241 Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

P280 Wear protective gloves, protective clothing, protective goggles, and a face mask.

After operating P264+P272, thoroughly clean the body contact area and do not take contaminated work clothes out of the workplace.

P270 Eating, drinking, and smoking are not allowed in the workplace.

P273 Prohibit discharge into the environment.

P201+P202 obtain special instructions before use. Do not move before understanding all safety precautions.

P271 can only be used outdoors or in well ventilated areas.

Accident response:

P301+P330+P313+P331 If ingested: rinse mouth and seek medical attention immediately. Do not induce vomiting.

P304+P340+P313 If inhaled: Immediately transfer the patient to a place with fresh air, rest, and maintain a breathing friendly environment. Seek medical attention.

P305+P351+P338+P313 If it enters the eyes, carefully rinse with water for a few minutes and pay attention to thorough cleaning. If wearing contact lenses is easy to remove, take out the contact lenses and continue rinsing. Seek medical attention.

P302+P352+P313 Skin (or hair) contact: Immediately remove all contaminated clothing and apply a large amount of fat. Rinse with soap water or running clean water. If skin irritation occurs, seek medical attention.

P333+P313 If skin irritation or rash occurs, seek medical attention.

P362 Contaminated clothing should be thoroughly cleaned before reuse.

P321 Specific treatment (see first aid measures on this label).

P501 Collect leaked materials and dispose of the contents/containers to an approved waste disposal plant.

P370+P378 In case of fire, use dry powder, foam, carbon dioxide and sand to extinguish the fire.

Safe storage:

P403+P233 should be stored in a cool, well ventilated place.

P405 storage area requires shackles.

Disposal of waste:

P501 Dispose of the contents/containers to an approved waste treatment plant.

Physical and chemical hazards: highly flammable. Its vapor can form an explosive mixture with air, which can ignite and explode when exposed to open flames or high heat energy. Its vapor is heavier than air and can
Spread to a considerable distance at a lower level, it will ignite and reignite when encountering a source of fire. Strong reactions can occur with prohibited substances such as strong oxidants, posing a risk of fire and explosion.
Excessive flow velocity can easily generate and accumulate static electricity. Burning or thermal decomposition produces toxic and irritating smoke.

Health hazards: Contact can cause skin, eye, and respiratory irritation. May affect the central nervous system. Ingestion of liquids and inhalation into the lungs may cause chemical pneumonia. high concentration
Exposure can cause abnormal heart rhythm, blurred consciousness, and even death. Symptoms of inhalation include coughing, dizziness, headache, drowsiness, nausea, and blurred consciousness. Skin contact causes skin damage
Dry skin, redness and pain. Redness and pain symptoms appear upon eye contact. Ingestion can cause abdominal pain, sore throat, vomiting, etc. Long term repeated contact with the skin causes skin defatting;
Affects the central nervous system; Affects the bone marrow and immune system, causing changes in the hematopoietic system such as leukopenia, and in severe cases, aplastic anemia; Causing genetic deficiency
Trapped; Suspected of damaging fertility or the fetus.